JBC-2 CE Standard 35-150/35-150 Insulation Piercing Connectors IPC Waterproof Electrical Fittings, China JBC-2 CE Standard 35-150/35-150 Insulation Piercing Connectors IPC Waterproof Electrical Fittings Manufacturers, Suppliers, Factory -Wenzhou Feman Electric Co., Ltd

Connector general features:

Insulation piercing is carried out on the main and tap conductors simultaneously.

The dielectric strength in water is greater than 6kV.

The tightening screws are potential free.

Tightening efficiency is ensured by shear head screws.

It is carrying membranes instead of grease, granting watertightness around tap conductor end on long term basis.

It can be equipped with a hard end cap, gripping and covering so, in case rigid cover is required.

Dimensions
Main Cable Line:	35-150mm²
Branch Cable Line:	35-150mm²
Norminal Current:
Piercing Depth:
Features
Bolt:	M8*70
Mechnical
Tightening Torque:	20Nm

Insulation piercing connector is a cable connection product that replaces junction boxes and T junction boxes. There is no need to cut off the main cable during construction, and branches can be made at any position of the cable. There is no need for special treatment of wires and clamps, and the operation is simple and fast.

Quick Detail:

Different terms for products:IPC, Insulation piercing connector, insulation piercing clamp, cable connector, LV ABC cable connector

Main uses:The use of insulation piercing connector is another cable T connection method after cable distribution boxes and pre-branch cables. It can be used in low-voltage power and lighting distribution lines such as high-rise buildings, residential buildings, street light distribution, and outdoor overhead lines. It can be installed in shafts or in the open air.